Boom Page
This page describes all functionalities to control your boom.
[Button]:
[Fold boompart] - Fold boompart in/out
[Link parts] - Link inner and outer parts
[Link folding] - Link left and right folding
[Auto fold]
[Variable geometry left/right/up/down]
[Variable geometry straight]
[Balance control left/right]
[Balance lock]
[Boom up/down]
[Balance center]
Boom Programs
[Level]
[Height control fixed boom]
[Height control variable geometry]
[Link variable geometry] - Link variable geometry left/right
[Height control setting]
Folding
[Auto fold] will automatically fold/unfold the boom. To manually fold / unfold the inner and outer parts of the boom you can use the [Fold boompart] buttons (in/out/inner part/outer part). You can also link the left and right folding [Link folding] or inner and outer parts [Link parts].
Manual Boom Control
Manual boom control options are:
1. Boom Height
[Boom up/down] Up and Down
2. Balance Control
[Balance control left/right] Left and Right
[Balance center]
[Balance lock]
3. Variable Geometry
[Variable geometry left/right/up/down]
Left up/down
Right up/down
[Link Variable geometry] - Left and Right
[Variable geometry straight]
Boom Programs
[Level] - For flat surfaces and boom without sensors
[Height control fixed boom] - For height control with a fixed boom
[Height control setting] - to adjust the height
[Height control variable geometry] - For height control with variable geometry
[Height control setting] - to adjust the height