Machine Page
All machine functionalities can be controlled on this page including headland management, turning lights on/off and steering (drawbar / axle).
[Button]:
[Headland] - Activate headland management
Lights
[Work light]
[Beacon]
[Boom light]
Drawbar steering
[Auto], [Lock], [Manual]
[Left], [Center], [Right]
Axle steering
[Auto], [Lock], [Manual]
[Left], [Center], [Right]
Lights
Press any of the light buttons (work, beacon or boom) to turn them on or off.
Steering
To set a new center position, go to manual control [Manual]. Use [Left] and [Right] button to move the wheels to the center position. When you are happy with the position, press and hold the center position icon [Center]. This will set the current position as new center.
With manual steering, the system is mechanically limited, not with software
this only applies to automatic steering.
Headland Management
LeapBox offers four steps in headland management. It is not obligatory to use all steps. Pressing button [Headland] enables/disables headland management.
Once enabled, the main switch turns into the headland management step button.