Liquid Page
All liquid functionalities can be controlled on this page including filling of the main and clean tank, and available programs for cleaning the machine.
[Button]:
Clean tank level
[Tank selection valve]
Main tank level
[Sieve cleaning]
[Tank cleaning]
[Drain valve]
Stirring
[High]
[Medium]
[Low]
Ventilator indicator / control
[Cleaning] - Cleaning page / cleaning program
Cleaning Program
After each spraying session, the system must be cleaned to ensure the maximum life of the valves. When leaving chemicals, dirt, and sand in the valves, they can become stuck after a certain amount of time.
LeapBox can handle a large variety of cleaning programs. Depending on you machine, certain programs will be invisible.
In the 'clean selection', you can select what needs to be cleaned: arms only, full machine, or full machine extra clean.
In the 'residual water selection', you can select where the liquid needs to go to.
Warning: Make sure the machine is filled with clean water during the cleaning procedure.
[Button]:
Clean selection
[Arms only]
[Machine and arms]
[Machine and arms multiple times]
Residual water selection
[Back to tank]
[Spray out]
[Drain and spray out]
[Drain]
[Start Program]