BBLeap virtual terminal: More page
Go to the Home Page and click on the logo at the left top to go to the More menu, which includes pages for statistics, settings, speed source selection and software version.
[Button]:
More menu:
[Statistics]
[Settings]
[Speed source selection]
[Software version]
Statistics
Last reset point
Total machine
Statistics
The Statistics Page shows different totals of your spraying operations, including:
Time machine on
Time sprayed
Hectares covered horizontal
Hectare sprayed horizontal
Liters sprayed
Average application rate (actual / horizontal)
The totals are available from [Last reset point] and for [Total machine].
Settings
Page for different settings.
@@ Add image @@
Speed Source Selection
Speed source selection is obligatory in order to start spraying. Without speed, LeapBox is not able to spray. Simply select the speed source you want to use. In case you are not sure, open this page and drive a bit. Every speed source that gives input will be shown. Also, when speed is detected, the checkbox will turn green. Select the speed source.
Press save if any changes are made.
Note: When you change the tractor in front of the sprayer, a different speed source might be required.
[Source]:
[Speed source selection] - turns green when speed is detected
[Simulation speed setting]
[Activate simulation speed]
Speed
Software Version
See the installed software version.